Sure-Lok | Non-Retractable Fixed Point Shoulder Belt | FE200710/FE200710L

€28,81 EUR

Sale Sold out

Shipping calculated at checkout.

Quantity

Length 52" 82"

Non-Retractable Fixed Point Shoulder Belt

Non-Retractable Fixed-Point Shoulder Belt (FE200710 / FE200710L) is a simple fixed-length shoulder belt that mounts to the vehicle sidewall or to Series L-Track using the specified mounting kits.

Includes: Qty 1 Non-Retractable Fixed Point Shoulder Belt | FE200710 or E200710L

Length Options:

SKU	Length	Typical Use
FE200710	52″	Standard seating/wheelchair bay where anchor is close to passenger.
FE200710L	82″	Deeper bays or higher mounting points needing extra belt length.

KEY FEATURES:

Fixed-Point Design: Non-retractable shoulder belt set to a defined length for predictable fit.
Flexible Mounting: Mounts directly to vehicle sidewall or to Series L-Track using FE200745, FE200747, or FE200736 mounting kits.
System Compatible: Designed to be used with Sure-Lok lap belts and wheelchair tie-downs as part of a complete WC19-compliant system.
Compliance Tested: When used in a full Sure-Lok system, meets SAE J2249 30mph/20g, CSA Z605, school bus standards, ADA 49 CFR Part 38, FMVSS 222, and FMVSS 302 flammability.

This non-retractable shoulder belt comes in 52″ (FE200710) and 82″ (FE200710L) lengths and is designed as the upper-torso part of a complete occupant restraint system for wheelchair passengers. It anchors at a fixed point on the sidewall or into L-Track using FE200745, FE200747, or FE200736 hardware, allowing you to place the shoulder belt at the correct location for your vehicle layout.

Mounting & Use Notes:

Mount the upper end of the belt to sidewall or L-Track using the appropriate kit (FE200745/747/736) at a height and location that gives good shoulder contact without crossing the neck.
Always pair with an approved lap belt and a properly installed wheelchair tie-down system; the shoulder belt alone is not a wheelchair securement.